EasyWeed® Fluorescent

Siser
SKU: N/A Category:

Buy more save more!

Buy 1  
$12.50
Total:
$12.50
Buy 5 and save 14%
$12.50
$10.80
Total:
Buy 10 and save 18%
$12.50
$10.30
Total:
Buy 25 and save 24%
$12.50
$9.56
Total:
Buy 50 and save 26%
$12.50
$9.22
Total:

Subtotal

x

Fast Shipping Policy Facts:

  • Added as an extra charge
  • Charges calculated after order is placed
  • Multiple carriers and options available

GUARANTEED SAFE CHECKOUT

VISA
Mastercard
INTERAC e-Transfer
Bank Transfer - EFT

Description

EasyWeed applies at a lower temperature than competitor material, backing can be peeled hot or cold and doesn’t lift during weeding. It’s also extremely durable wash after wash and uses a lower pressure setting for application. EasyWeed is thinner than others on the market and offers a one-second tack application that’s great for multiple layers. EasyWeed has a pressure sensitive carrier that allows you to offer detailed designs on a wide variety of fabrics. EasyWeed can be cut with laser systems.

EasyWeed is 90 Microns / 3.5 Mils and is a PU composition.

EasyWeed Fluorescent Applies To:

  • 100% Cotton
  • 100% Polyester
  • Poly/Cotton Blends
  • Leather

Cutter Settings

Cricut Explore Air: Blade: AutoBlade, Standard  Setting: Vinyl +
Cricut Maker: Blade: AutoBlade, Fine-Point  Setting: Heat Transfer (Non-Cricut)
Brother Scan N Cut DX: Blade: AutoBlade  Cut Speed: 5  Half Cut: Auto
Silhouette Cameo 4: Blade: AutoBlade, 3  Material: Heat Transfer, Smooth  Force: 6  Speed: 8
Roland GX/GS-24: Blade: 45°  Gram Force: 80-90  Offset: .250  Speed: 30-50 cm/s
Graphtec: Blade: 45°  Gram Force: 8-9  Tool: CBO9U+0  Speed: 30 cm/s
US Cutter Titan 2 & 3: Blade: 45°/60°  Gram Force: 80-85  Speed: 300 mm/s  **Blade Advancing Varies
Mimaki CG-60SR III: Blade: 45° Gram Force: 80  Offset: 30  Speed: 20-30 cm/s
Brother Scan N Cut: Blade: Standard, 2  Cut Speed: 5  Cut Pressure: 1

The specifications listed are suggested starting points that may need to be adjusted according to blade, cutting strip and cutting mat wear. Always perform a test cut prior to cutting designs.

*Craft cutters were evaluated using cutter-specific standard grip cutting mats.

Applications Instructions

For Home Iron

  1. Set iron dial between Cotton and Linen
  2. Cover design with Multipurpose Paper or Heat Transfer Cover Sheet
  3. Place on flat, hard surface (ironing board not recommended)
  4. Press iron with medium/firm pressure (do not slide iron)
  5. Press each section of design for 10-15 seconds
  6. If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds
  7. Peel carrier hot or cold

For Heat Press

  1.  Cover with Heat Transfer Cover Sheet or Multipurpose Paper
  2. Preheat garment for 2-3 seconds
  3. Apply design at 305°F/150°C
  4. Use medium pressure for 10-15 seconds
  5. If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds
  6. Peel carrier hot or cold

Care Instructions

  • Wait 24 hours before first wash
  • Machine wash warm or cold with mild detergent
  • Do not bleach or dry clean
  • Dry on normal setting