EasyReflective®

Siser
SKU: N/A Category:

Buy more save more!

Buy 1  
$18.00
Total:
$18.00
Buy 5 and save 9%
$18.00
$16.40
Total:
Buy 10 and save 13%
$18.00
$15.70
Total:
Buy 25 and save 14%
$18.00
$15.40
Total:
Buy 50 and save 21%
$18.00
$14.18
Total:

Subtotal

x

Fast Shipping Policy Facts:

  • Added as an extra charge
  • Charges calculated after order is placed
  • Multiple carriers and options available

GUARANTEED SAFE CHECKOUT

VISA
Mastercard
INTERAC e-Transfer
Bank Transfer - EFT

Description

EasyReflective is Siser’s only reflective HTV with a pressure sensitive (sticky) carrier just like EasyWeed®! This highly reflective heat transfer vinyl is truly an exceptional polyurethane product due to its glass bead construction that illuminates the darkest of conditions. The pressure sensitive carrier allows you to re-stick lifting material or replace a piece that’s accidentally weeded away. With a low application temperature and simple warm peel, EasyReflective can be applied to all kinds of garments and accessories that need to stand out in low lighting. Heat apply EasyReflective with a heat press or home iron for increased visibility on sports garments, pet clothes, construction crew uniforms, and more!

EasyReflective is 140 Microns / 5.5 Mils and is a PU composition.

EasyReflective Applies To:

  • 100% Cotton
  • 100% Polyester
  • Poly/Cotton Blends
  • Nylon

Cutter Settings

Cricut Explore Air: Blade: AutoBlade, Standard  Setting: Iron-On +
Cricut Maker: Blade: AutoBlade, Fine-Point  Setting: Heat Transfer (Non-Cricut)
Brother Scan N Cut DX: Blade: AutoBlade  Cut Speed: 5  Half Cut: Auto
Silhouette Cameo 4: Blade: AutoBlade, 3  Material: Heat Transfer, Smooth  Force: 6  Speed: 8
Roland GX/GS-24: Blade: 45°  Gram Force: 80-90  Offset: .250  Speed: 30-50 cm/s
Graphtec: Blade: 45°  Gram Force: 8-9  Tool: CBO9U+0  Speed: 30 cm/s
US Cutter Titan 2 & 3: Blade: 45°/60°  Gram Force: 80-85  Speed: 300 mm/s  **Blade Advancing Varies
Mimaki CG-60SR III: Blade: 45° Gram Force: 80  Offset: 30  Speed: 20-30 cm/s
Brother Scan N Cut: Blade: Standard, 2  Cut Speed: 5  Cut Pressure: 1

The specifications listed are suggested starting points that may need to be adjusted according to blade, cutting strip and cutting mat wear. Always perform a test cut prior to cutting designs.

*Craft cutters were evaluated using cutter-specific standard grip cutting mats.

Application Instructions

For Home Iron

  1. Set iron dial between Cotton and Linen
  2. Cover design with Multipurpose Paper or Heat Transfer Cover Sheet
  3. Place on flat, hard surface (ironing board not recommended)
  4. Press iron with medium/firm pressure (do not slide iron)
  5. Press each section of design for 10-15 seconds
  6. If areas of design lift after application, replace cover sheet
    and re-press for 10 seconds
  7. Peel carrier warm

For Heat Press)

  1. Cover with Heat Transfer Cover Sheet or Multipurpose Paper
  2. Preheat garment for 2-3 seconds
  3. Apply design at 305°F/150°C
  4. Use medium pressure for 15 seconds
  5. If areas of design lift after application, replace cover sheet
    and re-press for 5-10 seconds
  6. Peel carrier warm (wait at least 15 seconds)

Care Instructions

  • Wait 24 hours before first wash
  • Machine wash warm or cold with mild detergent
  • Do not bleach or dry clean
  • Dry on normal setting
  • Liquid fabric softener not recommended