EasySubli® Pack

Siser

$55.00
You save

1 pack

  • 10 EasySubli sheets of   8.4″ x 11″
  • 10 EasySubli Mask sheets of   8″ x 10″

 

Subtotal

x

Fast Shipping Policy Facts:

  • Done Added as extra charge
  • Done Charges calculated after order is placed
  • Done Multiple carriers and options available
GUARANTEED SAFE CHECKOUT
  • Visa Card
  • MasterCard
SKU: ESUBPACK Category:

Description

Now offering, EasySubli®, the matte heat transfer vinyl that’s receptive to sublimation inks! Siser EasySubli HTV is the key to decorating colored polyester (excluding sublimated polyester garments) and cotton blends. Never be limited to white polyester again when you switch to EasySubli!

Achieve the brightest colors and best results when paired with the specially developed printing profile and Siser EasySubli Inks by Sawgrass. Available for the Virtuoso SG400 and SG800, Siser EasySubli Inks can do more than just print on EasySubli! Use Siser EasySubli Inks to achieve all your standard dye-sub needs as well, so there’s no need to switch out inks between projects. The low application temperature of 311°F even allows you to decorate heat sensitive fabrics like tri-blends and rayon!

EasySubli Applies To:

  • 100% Cotton
  • 100% Polyester
  • Poly/Cotton Blends

Cutter Settings

Cricut Explore Air: Blade: AutoBlade, Standard  Setting: Iron On
Cricut Maker: Blade: AutoBlade, Fine-Point  Setting: Heat Transfer (Non-Cricut)
Brother Scan N Cut DX: Blade: AutoBlade, 2  Cut Speed: 1  Half Cut: 1
Silhouette Cameo 4: Blade: AutoBlade, 3  Material: Heat Transfer, Smooth  Force: 8  Speed: 15
Roland GX/GS-24: Blade: 45°  Gram Force: 80-90  Offset: .250  Speed: 30-50 cm/s
Graphtec: Blade: 45°  Gram Force: 8-9  Tool: CBO9U+0  Speed: 30 cm/s
US Cutter Titan 2 & 3: Blade: 45°/60°  Gram Force: 80-85  Speed: 300 mm/s  **Blade Advancing Varies
Mimaki CG-60SR III: Blade: 45° Gram Force: 95  Offset: 30  Speed: 20-30 cm/s
Brother Scan N Cut: Blade: Standard, 2  Cut Speed: 5  Cut Pressure: 1

The specifications listed are suggested starting points that may need to be adjusted according to blade, cutting strip and cutting mat wear. Always perform a test cut prior to cutting designs.

*Craft cutters were evaluated using cutter-specific standard grip cutting mats.

Application Instructions

For Heat Press

  1. Print, cut and weed material
  2. Cover design with Multipurpose Paper or Heat Transfer Cover Sheet
  3. Preheat garment for 2-3 seconds
  4. Apply design at 311°F/155°C
  5. Use medium pressure for 15 seconds
  6. Peel EasySubli mask Hot

Care Instructions

  • Wait 24 hours before first wash
  • Machine wash cold with mild detergent
  • Do not bleach or dry clean
  • Dry on normal setting