Specialty Material Transfers

StripFlock® Pro

Convenient Ready-to-Apply Transfers

Ordering is as easy as 1 – 2 – 3!

  1. Upload your digital artwork file with your order.
  2. You receive your transfers cut and weeded on clear carrier sheets.
  3. You apply transfers to your material.

Fast Shipping Policy Facts:

  • Done Added as extra charge
  • Done UPS is our official carrier
  • Done Next day ground service option

Description

The only flock in the industry that can be layered on itself!

StripFlock Pro is 410 Microns / 16.1 mils and is a PU composition.

StripFlock Applies To:

  • 100% Cotton
  • 100% Polyester
  • Poly/Cotton Blends
  • Leather

A great alternative to embroidery, StripFlock Pro heat transfer vinyl gives logos a raised, textured, suede-like feel. The fuzzy opaque colors make StripFlock Pro excellent for retro designs like you’d find in a mall in the 80’s, or anytime you want a deep, rich look. StripFlock Pro is thick enough to cover hat seams, yet also looks excellent on bags, denim, and other garments that need textured visual interest. Use Stripflock Pro as a base layer and cover with other materials such as EasyWeed Stretch for an embossed look, or layer with more StripFlock! The ability to layer this material with itself and others allows you to say “yes” to multi-color designs. However, please note that for best results all fluorescent colors are recommended to be layered with the knockout method and the carrier peeled warm.

Application Instructions

For Home Iron

  1. Set iron dial between Cotton and Linen
  2. Cover design with Kraft Paper or Heat Transfer Cover Sheet
  3. Place on flat, hard surface (ironing board not recommended)
  4. Press iron with medium/firm pressure (do not slide iron)
  5. Press each section of design for 15 seconds
  6. If areas of design lift after application, replace cover sheet and re-press for 10 seconds
  7. Peel carrier warm

For Heat Press

  1. Cover design with Kraft Paper or Heat Transfer Cover Sheet
  2. Preheat garment for 2-3 seconds
  3. Apply design at 311°F/155°C
  4. Use medium pressure for 15 seconds
  5. Peel carrier warm (at least 10 seconds off press)

Related products