EasyPSV® Application Tape

Fast Shipping Policy Facts:

  • Done Added as extra charge
  • Done UPS is our official carrier
  • Done Next day ground service option only (for now)

Description

This all-purpose tape mask is used to pick up EasyPSV from its paper liner and transfer the design onto an object’s surface with ease. The medium tack and clear surface make Siser Application Tape great for graphics of all sizes. From mini monograms to major wall graphics, it gets the job done! Fitted with a 1” square grid pattern to keep your decal straight, Application Tape makes measuring a breeze and centering your graphics super easy!

Warning
    • Not recommended for use near flame/heat source.
    • Not microwave or dishwasher safe.

EasyPSV® Application Tape can be used on painted drywall.

Application Instructions

Print and Cut Instructions:

  1. Print and cut your design (do not reverse/mirror)
  2. Weed excess vinyl
  3. Remove application tape’s paper liner and place on top of EasyPSV
  4. Burnish with a Squeegee
  5. Place on desired object and burnish with a squeegee
  6. Peel away the application tape

Application Instructions:

  1. Preheat garment for 2-3 seconds
  2. Apply design at 311°F / 155°C
  3. Use medium/firm pressure for 5 seconds
  4. Peel carrier Hot
  5. Re-cover design and press for 20 seconds

Surface Prep

  • For best adhesion, remove any dirt, dust, grease, etc to prepare the surface you want to decorate with EasyPSV.
  • The following cleaning method is not recommended for porous surfaces such as unfinished/untreated wood.
  • It is recommended that all other surfaces be spot tested with care before cleaning the entire application area.
  • Non-porous surfaces can be cleaned with a mix of approximately 2 parts water and 1 part isopropyl alcohol (70% or higher for best results) or non-amonia based window cleaner.
  • Use a microfiber or lint free towel to clean the application area with the mixture.
  • Paper towel is not recommended since it will leave behind small bits of paper that can become trapped under the EasyPSV during application.
  • Ensure the area is completely dry before applying.

*The cleaning method outlined above is subject to modification and not always suitable for every substrate.

The purchaser should independently determine with their own testing to use this method or not on a case by case basis.

Removal

  • If the EasyPSV peels up, but leaves an adhesive residue use an adhesive remover to clean the area.
  • If the EasyPSV is stubbornly sticking, the heat from a hair dryer or garment steamer can help loosen the adhesive.
  • However, heating is not recommended for glass due to possible shattering.
  • To remove Permanent EasyPSV from glass, saturate the decal with soap and water.
  • Cover with plastic wrap and let sit for a few hours before attempting to remove.
  • An adhesive remover may still be required to clean all adhesive from the surface after removing the EasyPSV.

*The removal instructions outlined above are subject to modification and not always suitable for every substrate.

The purchaser should independently determine with their own testing to use this method or not on a case by case basis.