EasyWeed® Stretch

Flexible Style for Performance Wear and More!

EasyWeed Stretch is 85 Microns / 3.35 Mils and is a PU composition.

EasyWeed Stretch Applies To:

  • 100% Cotton
  • 100% Polyester
  • Poly/Cotton Blends
  • Leather
  • Lycra/Spandex

Login for Price

Fast Shipping Policy Facts:

  • Done Added as extra charge
  • Done Purolator is our official carrier
  • Done Next day ground service option only (for now)

Description

Activewear has met its match! EasyWeed Stretch by Siser delivers all the benefits of our EasyWeed heat transfer vinyl and combines it with super stretchability to create one remarkable HTV! The thinnest of any Siser material, EasyWeed Stretch has a true matte finish that’s available in over 20 popular colors! While EasyWeed Stretch is ideal for performance apparel from spandex to dri-fit, the soft hand and light weight often make it a favorite for other garments such as: tank tops, onesies, and almost anything else. Check out the Top Ten Siser Heat Transfer Vinyl Tips for other great uses for HTV! EasyWeed Stretch can even be cut with laser systems.

 

Additional information

Weight N/A
Dimensions N/A
Width (in)

15", 20"

Length (yd)

1 yd, 5 yd, 10 yd, 25 yd, 50 yd

Cutter Settings

Cricut Explore Air: Blade: AutoBlade, Standard  Setting: Vinyl +
Cricut Maker: Blade: AutoBlade, Fine-Point  Setting: Heat Transfer (Non-Cricut)
Brother Scan N Cut DX: Blade: AutoBlade  Cut Speed: 1-2  Half Cut: Auto
Silhouette Cameo 4: Blade: AutoBlade, 3  Material: Heat Transfer, Smooth  Force: 6  Speed: 8
Roland GX/GS-24: Blade: 45°  Gram Force: 80-90  Offset: .250  Speed: 30-50 cm/s
Graphtec: Blade: 45°  Gram Force: 9-10  Tool: CBO9U+0  Speed: 30 cm/s
US Cutter Titan 2 & 3: Blade: 45°/60°  Gram Force: 80-85  Speed: 300 mm/s  **Blade Advancing Varies
Mimaki CG-60SR III: Blade: 45° Gram Force: 80  Offset: 30  Speed: 20-30 cm/s
Brother Scan N Cut: Blade: Standard, 2  Cut Speed: 1-2  Cut Pressure: 1

The specifications listed are suggested starting points that may need to be adjusted according to blade, cutting strip and cutting mat wear. Always perform a test cut prior to cutting designs.

*Craft cutters were evaluated using cutter-specific standard grip cutting mats.

Applications Instructions

For Home Iron

  1. Set iron dial between Cotton and Linen
  2. Cover design with Multipurpose Paper or Heat Transfer Cover Sheet
  3. Place on flat, hard surface (ironing board not recommended)
  4. Press iron with firm pressure (do not slide iron)
  5. Press each section of design for 20 seconds
  6. If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds
  7. Peel carrier hot or cold

For Heat Press

  1. Cover with Heat Transfer Cover Sheet or Multipurpose Paper
  2. Preheat garment for 2-3 seconds
  3. Apply design at 320°F/160°C
  4. Use firm pressure for 20 seconds
  5. If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds
  6. Peel carrier hot or cold

Care Instructions

  • Wait 24 hours before first wash
  • Machine wash cold with mild detergent
  • Do not bleach or dry clean
  • Dry on normal setting