EasyPatterns® Plus

Login for Price

Fast Shipping Policy Facts:

  • Done Added as extra charge
  • Done Purolator is our official carrier
  • Done Next day ground service option only (for now)

Description

These pre-printed patterns eliminate the need for layering multiple solid colors, therefore eliminating extra weight on the garment! Available in styles ranging from classic to cool, there’s bound to be a pattern that’s perfect for your next project. EasyPatterns Plus were designed to fit into a variety of vinyl cutters as easily as they fit into a variety of niches and trends. Simply cut in the positive (do not mirror) with the pattern facing up, weed away the excess from the static carrier, and mask with TTD High Tack and a squeegee. After heat application, the mask releases quick and easy while still warm. Mix and match EasyPatterns Plus with other types of Siser HTV for extraordinary styles. Just be sure to keep EasyPatterns Plus as the top layer for best results. With a semi-gloss finish and soft hand, EasyPatterns Plus are the star of the show even when applied with a home iron!

EasyPatterns Plus are 80 Microns / 3.1 Mils and are a PU composition.

EasyPatterns Plus Applies To:

  • 100% Cotton
  • 100% Polyester
  • Poly/Cotton Blends
  • Leather

Cutter Settings

Cricut Explore Air: Blade: AutoBlade, Standard  Setting: Iron On
Cricut Maker: Blade: AutoBlade, Fine-Point  Setting: Heat Transfer (Non-Cricut)
Brother Scan N Cut DX: Blade: AutoBlade  Cut Speed: 5  Half Cut: Auto
Silhouette Cameo 4: Blade: AutoBlade, 3  Material: Heat Transfer, Smooth  Force: 6  Speed: 8
Roland GX/GS-24: Blade: 45°  Gram Force: 80-90  Offset: .250  Speed: 30-50 cm/s
Graphtec: Blade: 45°  Gram Force: 8-9  Tool: CBO9U+0  Speed: 30 cm/s
US Cutter Titan 2 & 3: Blade: 45°/60°  Gram Force: 60-65  Speed: 300 mm/s  **Blade Advancing Varies
Mimaki CG-60SR III: Blade: 45° Gram Force: 90  Offset: 30  Speed: 20-30 cm/s
Brother Scan N Cut: Blade: Standard, 2  Cut Speed: 5  Cut Pressure: 1

The specifications listed are suggested starting points that may need to be adjusted according to blade, cutting strip and cutting mat wear. Always perform a test cut prior to cutting designs.

*Craft cutters were evaluated using cutter-specific standard grip cutting mats.

PLEASE NOTE: Due to increased heat and humidity during the summer months, we recommend allowing TTD Masks to return to indoor room temperature (below 70°F/21°C) before use for best performance. If additional cooling is needed, TTD Masks can be places inside a fridge or freezer for 5-10 minutes.

Applications Settings

For Home Iron

  1. Cut design in positive (do not mirror)
    Mask with 12″ TTD High Tack Mask
  2. Cover design with Multipurpose Paper or Heat Transfer Cover Sheet
  3. Place on flat, hard surface (ironing board not recommended)
  4. Press iron with medium/firm pressure (do not slide iron)
  5. Press each section of design for 10-15 seconds
  6. If areas of design lift after application, replace cover sheet
    and re-press for 10 seconds
  7. Peel carrier hot or cold

For Heat Press

  1. Cut design in positive (do not mirror)
  2. Weed excess material
  3. Mask with 12″ TTD High Tack Mask
  4. Cover with Heat Transfer Cover Sheet or Multipurpose Paper
  5. Preheat garment for 2-3 seconds
  6. Apply design at 305°F/150°C
  7. Use medium pressure for 10-15 seconds
  8. Peel carrier hot or cold
  9. Cover and reheat for 2-3 seconds

Care Instructions

  • Wait 24 hours before first wash
  • Machine wash cold with mild detergent
  • Do not bleach or dry clean
  • Dry on normal setting