Heat Transfer Vinyl

EasyWeed® Sub Block

Fast Shipping Policy Facts:

  • Done Added as extra charge
  • Done UPS is our official carrier
  • Done Next day ground service option only (for now)

Description

Standard heat transfer vinyl isn’t designed for use on sublimated polyester. If you apply regular HTV to a sublimated garment, you may experience “dye migration.” Dye migration is when the sublimation inks in the garment bleed into the heat transfer vinyl and change the color of the HTV. EasyWeed Sub Block is specially formulated to block most dye migration and leave you with a crisp finished product! EasyWeed Sub Block is ideal for the popular digital camo and motocross jerseys! You can even layer other Siser® materials on top to create a more colorful look!

EasyWeed Sub Block is 110 Microns / 4.3 Mils and is a PU composition.

EasyWeed Sub Block Applies To:

  • Polyester
  • Sublimated polyester

Cutter Settings

Cricut Explore Air: Blade: AutoBlade, Standard  Setting: Vinyl +
Cricut Maker: Blade: AutoBlade, Fine-Point  Setting: Heat Transfer (Non-Cricut)
Brother Scan N Cut DX: Blade: AutoBlade  Cut Speed: 5  Half Cut: Auto
Silhouette Cameo 4: Blade: AutoBlade, 3  Material: Heat Transfer, Smooth  Force: 6  Speed: 8
Roland GX/GS-24: Blade: 45°  Gram Force: 80-90  Offset: .250  Speed: 30-50 cm/s
Graphtec: Blade: 45°  Gram Force: 8-9  Tool: CBO9U+0  Speed: 30 cm/s
US Cutter Titan 2 & 3: Blade: 45°/60°  Gram Force: 80-85  Speed: 300 mm/s  **Blade Advancing Varies
Mimaki CG-60SR III: Blade: 45° Gram Force: 80  Offset: 30  Speed: 20-30 cm/s
Brother Scan N Cut: Blade: Standard, 2  Cut Speed: 5  Cut Pressure: 3

The specifications listed are suggested starting points that may need to be adjusted according to blade, cutting strip and cutting mat wear. Always perform a test cut prior to cutting designs.

*Craft cutters were evaluated using cutter-specific standard grip cutting mats.

Application Instructions

For Home Iron

  1. Set iron dial between Cotton and Linen
  2. Cover design with Multipurpose Paper or Heat Transfer Cover Sheet
  3. Place on flat, hard surface (ironing board not recommended)
  4. Press iron with medium/firm pressure (do not slide iron)
  5. Press each section of design for 10-15 seconds
  6. If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds
  7. Peel carrier hot or cold

For Heat Press

  1. Cover with Heat Transfer Cover Sheet or Multipurpose Paper
  2. Preheat garment for 2-3 seconds
  3. Apply design at 265°F/130°C
  4. Use medium pressure for 10-15 seconds
  5. If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds
  6. Peel carrier hot or cold

Care Instructions

  • Wait 24 hours before first wash
  • Machine wash cold with mild detergent
  • Do not bleach or dry clean
  • Hang item to dry

Videos

Related products