Custom Transfer Brick®600

SKU: N/A Categories: ,

Subtotal

x

Fast Shipping Policy Facts:

  • Added as an extra charge
  • Charges calculated after order is placed
  • Multiple carriers and options available

GUARANTEED SAFE CHECKOUT

VISA
Mastercard
INTERAC e-Transfer
Bank Transfer - EFT

Description

Our Thickest Heat Transfer Vinyl, Now Easier to Cut and Apply!

Brick is 600 Microns / 23.6 Mils and is a PU composition.

Brick is Layerable only if using the embossed method of heat application.

Brick Applies To:

  • 100% Cotton
  • 100% Polyester
  • Poly/Cotton Blends

Thin or thick, materials of all sizes have a place in garment decorating. Brick® heat transfer vinyl by Siser® is a 600 micron thick, flexible heat transfer vinyl that’s designed for smaller logos and designs to add extra dimension to your garments. Brick’s matte finish looks great on caps, bags, and is ideal for left chest logos. This trendy look can be seen on sports apparel all over the globe. When used as a base layer and covered with EasyWeed® Stretch, the combination gives a great embossed look. The next time you feel your design could benefit from a boost in height, consider giving it some dimension with Brick by Siser!

Application Instructions

For Home Iron

  1. Set iron dial between Cotton and Linen
  2. Cover design with Kraft Paper or Heat Transfer Cover Sheet
  3. Place on flat, hard surface (ironing board not recommended)
  4. Press iron with medium/firm pressure (do not slide iron)
  5. Press each section of design for 20 seconds
  6. If areas of design lift after application, replace cover sheet and re-press for 10-15 seconds
  7. Peel carrier cold

For Heat Press

  1. Cover design with Kraft Paper or Heat Transfer Cover Sheet
  2. Preheat garment for 2-3 seconds
  3. Apply design at 311°F/155°C
  4. Use medium pressure for 20 seconds
  5. Peel carrier cold

Related products