StripFlock® Heat Transfer Vinyl

Comes in:
15 (in) roll (14.74 actual size) / SKU: SF15P50xx

The Only Flock in the Industry That can be Layered on Itself!

A great alternative to embroidery, StripFlock® gives logos a raised, textured, suede-like feel. The deep, opaque colors make it perfect for retro designs, varsity feel or anytime you want a rich look. Stripflock® can be used as a base layer and covered with other materials, giving a very unique, high-end look to logos and designs. 


WhiteGrayBlackRedBright RedOrangeYellowLemonGreenPale BlueRoyal BlueNavy BluePink

For larger, more accurate color samples, install the Siser app from the App Store or on Google Play.



PVC composition  •  Pressure sensitive backing  •  Suede-like finish  •  410 Microns / 16.1 Mils   •   Can be layered





Blade: Standard
Setting: Iron-On+

Silhouette Cameo:


Blade: Standard, 4
Material: Heat Transfer, Flocked
Speed: 5
Force: 6

Scan N Cut:


Blade: Standard, 4
Cut Speed: 1
Cut Pressure: 2

Roland GS/GX-24:


Blade: 45°
Gram Force: 80-120
Offset: .250
Speed: 30 cm/s



Blade: 45°
Gram Force: 10
Tool: CB09U+0
Speed: 30 cm/s


Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs.



Application instructions (home iron)

• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 15-20 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 10 seconds
• Peel carrier cold
Application Instructions (heat press)

• Cut in reverse
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 320°F/160°C
• Use medium pressure for 10-15 seconds
• Peel carrier cold


StripFlock Applies to:


100% cotton
Poly/cotton blends
100% polyester

Recommended Accessories:


Siser Weeder
Multipurpose Paper or
Kraft Paper or
Heat Transfer Cover Sheet



Wait 24 hours before 1st wash
Machine wash warm or cold / mild detergent
Dry on normal dryer setting
Do not dry clean